特點:
1、本機自帶動力,完全不會影響原機械設計結構,安全并且 更為方便;
2、重量輕,體積小,安裝方便;
3、入口粗濾網設計,保護油泵,延長使用壽命,粗濾網可 清洗,無需更換;
4、壓力控制開關,在濾芯堵塞造成壓力升高時,可以自動停機保護;
5、磁力啟動開關,可以有效保護電機,防止過載。
特點:
1、本機自帶動力,完全不會影響原機械設計結構,安全并且 更為方便;
2、重量輕,體積小,安裝方便;
3、入口粗濾網設計,保護油泵,延長使用壽命,粗濾網可 清洗,無需更換;
4、壓力控制開關,在濾芯堵塞造成壓力升高時,可以自動停機保護;
5、磁力啟動開關,可以有效保護電機,防止過載。
使用方法:
SE采用了自帶動力方式,不影響原機械油路,適用于低壓力結構,安裝方便。使用時直接將設備所帶軟管的一端接在抽油口(帶粗濾的接口),另一端放入待過濾的污油中;同理,出油口(罐下接口)用另一根軟管相接,同時軟管的另一端接到待盛放干凈油的容器中,按動開關設備運行。本機入口處設有粗濾網,可讓您清洗方便,同時保護油泵,大大延長機械使用壽命。
型號MODEL |
SE-100 |
適用油種 Apply to oil |
礦油系列液壓油、潤滑油 Mineral oil series.The hydraulic oilLubricating oil |
使用油溫范圍 oil temperature range |
0~80℃ |
最大過濾流量(L/min) Maximum filtration rate(L/min) |
2.5 |
使用粘度范圍 Service viscosity range |
9~180cst |
壓力計 Pressure gauge |
?40 0~10kgf/c㎡ |
出入口徑 In diameter |
?10 |
使用濾芯個數 Filter the number |
ME-100×1 |
尺寸mm(L×W×H) SIZE |
500×400×450 |
重量 WIGHT |
21KG |
馬達 MOTOR |
單相(三相)1/4HP Single-phase three-phase |
Features:
1. The machine has its own power, which will not affect the original mechanical design structure, so it is safe and more convenient;
2. Light weight, small volume, easy installation;
3. Design of inlet coarse filter screen to protect oil pump and extend service life. The coarse filter screen can be cleaned without replacement;
4, pressure control switch, in the filter plug caused by pressure increase, can automatically stop the protection;
5. Magnetic starting switch can effectively protect the motor and prevent overload.
Usage:
SE series adopts its own power mode, which does not affect the original mechanical oil circuit. It is suitable for low pressure structure and easy to install. When in use, connect one end of the hose with the equipment directly to the oil suction port (interface with coarse filtering), and put the other end into the dirty oil to be filtered; Similarly, the oil outlet (the connection under the tank) is connected with another hose, and the other end of the hose is connected to the container to hold the clean oil. Press the switch to run the equipment. The entrance of this machine is equipped with coarse strainer, which can make cleaning convenient for you, protect oil pump, and greatly prolong the service life of the machine.